BVMBQ - WHITE METAL PRIMER, 3010
- MSDS: BVMBQ
- Manufacturer: PERVO PAINT CO
- Product Name: WHITE METAL PRIMER, 3010
- National Stock Number: 8010-00N052343
Product Identification
Product ID:WHITE METAL PRIMER, 3010
MSDS Date:02/26/1993
FSC:8010
NIIN:00N052343
MSDS Number: BVMBQ
Responsible Party
LOS ANGELES, CA 90001
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 213-758-1147
Cage: 86483
Contractor
Telephone: 213-758-1147
Cage: 86483
Ingredients
METHANOL; (METHYL ALCOHOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: TRACE
OSHA PEL 200 PPM, S
ACGIH TLV: 200 PPM;250 STEL, S
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
MINERAL SPIRITS
CAS: 64742-88-7
Fraction By Weight: 25-30%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
420 G/L (3.5 LBS/GAL).
RTECS: 9999999VO
Fraction By Weight: SEE ING
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED OR REPEATED
CONTACT OF PRODUCT MAY CAUSE IRRITATION. EYE:DIRECT CONTACT OF
PRODUCT CAN CAUSE IRRITATION. INHAL:VAPOR OR MIST CAN CAUSE
HEADACHE, NAUSEA, IRRITATION OF NOSE, THROAT & EYES. MAY PRODUCE
CENTRAL NERVOUS SYSTEM DEPRESSION. INGEST:POISONOUS IF SWALLOWED.
MAY RESULT IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:VOMITING. ASPIRATION OF VOMITUS INTO
LUNGS CAUSES ASPIRATION PNEUMONITIS. CHRONIC:MAY CAUSE DAMAGE TO
THE CENTRAL NERVOUS SYSTEM, RESPIRATORY SYSTEM, EYES & SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH AFFECTED AREAS W/WATER WHILE REMOVING CONTAM CLTHG.
GET IMMED MED ATTN. LAUNDER CONTAM CLTHG BEFORE REUSE. EYES:FLUSH
W/GENEROUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. GET IMMED MED
ATTN. INGEST:DO NOT INDUCE VOMITING. CALL MDIMMED. NEVER GIVE
FLUIDS OR INDUCE VOMITING IF VICTIM IS UNCONSCIOUS OR HAVING
CONVULSIONS. INHAL:MOVE TO FRESH AIR. AID IN BRTHG, IF NEC, & GET
IMMED MED ATTN.
Fire Fighting
Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . BLANK VAPOR W/EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:FLAMMABLE VAPOR CAN FORM EXPLOSIVE
MIXTURE W/AIR.
Accidental Release
Spill Release Procedures:SPILLS SHOULD BE CONTAINED, SOLIDIFIED &
PLACED IN A RCRA LICENSED FACILITY. HANDLING EQUIPMENT TO BE
GROUNDED TO PREVENT SPARKING. WEAR NIOSH/MSHA APPROVED RESPIRATORS,
EYES & SKIN PROTECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:EMPTY CONTAINERS W/NO RESIDUE AT ALL MAY BE
LANDFILLED AT A LICENSED FACILITY OR FOR RECONDITION. RECOMMEND
CRUSHING OR OTHER MEANS TO PREVENT UNAUTHORIZED REUSE. OTHER
CONTAINERS MUST BE DISPOSED OF IN A RCRA LICENSED FACILITY.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
WHEN VAPORS ARE GENERATED ABOVE PEL.
Ventilation:LOCAL EXHAUST TO CONTROL TO RECOMMENDED PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPD CHEMICAL GOGGLES .
Other Protective Equipment:CVRLLS, APRONS, BOOTS - AS NECS TO PREV SKIN
CONTACT. EYEWASH FTNS MTG ANSI DSGN CRITERIA SHLD BE EASILY ACCESS
.
Work Hygienic Practices:SHOWER AFTER HANDLING THIS PRODUCT. CLEAN
CLOTHING SHOULD BE WORN DAILY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:308F,153C
Melt/Freeze Pt:M.P/F.P Text:308F,153C
Vapor Pres:2.1 @ 20C
Vapor Density:3.5
Spec Gravity:1.4
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE VISCOUS LIQUID; MILD AROMATIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING, REDUCING AGENTS IN CONJUNCTION W/HEAT.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS OR DIRECT
SUNLIGHT.
Hazardous Decomposition Products:OXIDES OF CARBON.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . INCINERATE IN A RCRA LICENSED FACILITY. DO NOT
DISCHARGE INTO WATERWAYS OR SEWER SYSTEMS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.